Match UP 10DSP MK2 Installer Package

Match UP 10DSP MK2 Installer Package – 10-channel Class GD upgrade amplifier with 11-channel 64-bit DSP

This listing is the Installer Package version of the Match UP 10DSP MK2. The amplifier description below is taken from the official Match UP 10DSP MK2 product page; please check the exact package contents with us before ordering.

Installer Package – Scope of Delivery

This multi-unit installer package is aimed at professional installers and workshops who fit the same model in several vehicles. The package contains:

• 2 x MATCH UPGRADE amplifier UP 10DSP MK2
• 2 x Connection cable 2-pole MOLEX
• 2 x Connection cable 8-pole MOLEX
• 2 x Connection cable 12-pole MOLEX
• 2 x Power Input connector
• 2 x Mounting set

The MATCH UP 10DSP MK2 is the 10-channel model of the MATCH UPGRADE amplifier range, positioned as the premium sound upgrade for complex multi-channel factory systems in modern vehicles. It combines a 10-channel Class GD amplifier with an integrated 11-channel 64-bit DSP and is designed to integrate cleanly into the vehicle by tapping the signals at the speaker outputs of the factory amplifier.

Compared with the first generation, the MK2 adds a USB-C port and an Extension Card 2.0 slot with a screw-secured cover and cross-series compatibility. It is built around Audiotec Fischer technologies such as Class GD, the 32-bit ACO coprocessor, the ADEP.3 high-level input, SOP Max stabilised output power and Virtual Channel Processing, and is configured with DSP PC-Tool 6 including TuneEQ 2.0 and TuneToTarget.

Key Features

• 10 amplifier channels, 11 DSP channels: 8 × 65 W RMS at 4 Ω on channels A–H plus two subwoofer channels I–J (75 W at 4 Ω / 125 W at 2 Ω, up to 90 W / 160 W maximum in typical multi-channel use).
• 8 high-level inputs with ADEP.3: expandable to 10 with the optional Extension Card 2.0 – ANALOG IN; two inputs accept up to 32 V.
• Class GD: stepwise variation of the internal supply voltage for high efficiency, low idle losses and low heat, allowing small heat sinks and a compact housing.
• EV-ready: operating voltage range up to 18 V.
• ACO 32-bit coprocessor: fast start-up, up to ten sound setups and functions such as AISA/Input EQ, DLC, RTC, TuneEQ and SFX.
• Virtual Channel Processing (VCP): cross-channel group EQs, multi-way configuration of SFX effects and Rear Attenuation.
• 1:1 input-to-output routing: with the optional Extension Card 2.0 – ANALOG IN.
• SOP Max: stabilised output power independent of the input voltage.
• Extension Card 2.0 slot: for modules such as Bluetooth HD streaming (BT HD) or additional analogue inputs (ANALOG IN).
• Optical SPDIF input: 12–96 kHz, with automatic digital signal detection.
• Mono RCA output and SCP: line output for external amplifiers such as the MATCH UP 1FX; Smart Control Port for remote controls.
• Start-stop capable: down to 6 V, with auto remote switch and Power Save Mode.

Inputs & Outputs

• Inputs: 8 × high-level speaker input, 1 × optical SPDIF (12–96 kHz), 1 × Extension Card 2.0 slot.
• High-level input sensitivity: channels A–F 4–16 V, channels G–H 4–32 V; input impedance 9–33 Ω with ADEP.3.
• Outputs: 10 × speaker output, 1 × RCA (mono), 1 × remote out; RCA output voltage 3 V RMS; max. remote output current 500 mA.
• USB-C port for connection to DSP PC-Tool 6.

Power & Amplifier Section

• Channels A–H: 65 W RMS each at 4 Ω (≤ 1 % THD+N, min. 3 Ω DC resistance); up to 80 W RMS at 4 Ω in typical multi-channel applications.
• Channels I–J: 75 W RMS at 4 Ω and 125 W RMS at 2 Ω (≤ 1 % THD+N); up to 90 W RMS at 4 Ω and 160 W RMS at 2 Ω in typical multi-channel applications.
• Class GD amplifier with dynamically controlled power supply and SOP Max.
• Frequency response 15 Hz – 22 kHz; THD < 0.015 % and THD+N < 0.02 % (1 kHz, 1 W into 4 Ω).
• SNR: 105 dB digital input, 103 dB analogue input (A-weighted).
• Operating voltage 10.5–18 V (max. 5 s down to 6 V); power rating DC 12 V, 60 A max.; idle current 500 mA.
• Fusing: 2 × 25 A LP-Mini (APS); operating temperature −40 °C to +70 °C.

DSP & Sound Tuning

The 11-channel DSP works with 64-bit resolution, a 295 MHz processing core (1.2 billion MAC operations per second) and a 48 kHz sampling rate, with BurrBrown A/D and D/A converters. Set-up is done with DSP PC-Tool 6, which includes TuneEQ 2.0 and TuneToTarget for automated frequency response correction.

• TuneEQ 2.0: automated frequency response correction – a single measurement per channel or channel pair with a measurement microphone (the page names the AMI Tuning Kit) is enough for the software to set the parametric EQ bands (centre frequency, Q and gain) towards a target curve.
• RealCenter: derives a centre signal only from the content common to the front left and right channels; its level follows the stereo content, so material present on only one side produces no centre output.
• Augmented Bass Processing: combines Dynamic Bass Enhancement (input-dependent low-frequency boost and subsonic filter adjustment) with SubXpander, which adds subharmonics between 50 and 100 Hz for a deeper bass.
• VCP (Virtual Channel Processing): multi-stage virtual routing for multi-way front, rear and centre systems, with cross-channel group EQs, multi-way configuration of the SFX effects and Rear Attenuation.
• ACO functions: AISA (Advanced Input Signal Analyzer) with channel-separated Input EQ to analyse and correct the factory head unit’s signal, plus Dynamic Loudness Control (DLC) and Remote Tone Control (RTC) for volume-dependent adjustment of lows and highs.
• Sound setups: the ACO allows switching between up to ten sound setups.

Installation & Connectivity Notes

• Dimensions 46 × 145 × 163 mm (H × W × D).
• Optional vehicle-specific Plug & Play harnesses are available; the page lists e.g. PP-BMW 1.9HK+SDMI, PP-BMW 1.9RAM-HK, PP-BMW 1.10RAM-HK, PP-UNI 1.28 Hyundai, PP-UNI 1.30 Toyota, PP-UNI 1.48 MB, PP-TES 1.7B Highland and PP-TES 5.15 Ryzen Premium Main.
• Compatible remote controls and accessories named on the page: URC.1, URC.3, DIRECTOR, CONDUCTOR and CONDUCTOR PRO.
• Power Save Mode switches off the amplifier stages and remote output after a period without signal; operation resumes in about 2 seconds. The delay is adjustable or can be disabled in the DSP PC-Tool.
• Automatic digital signal detection switches to the optical input when a signal is present; it can be disabled in the PC-Tool or overridden manually with an optional remote.

Technical Specifications

* DC resistance min. 3.0 Ohms
** In typical multi-channel applications

Scope of Delivery

2 x MATCH UPGRADE amplifier UP 10DSP MK2
2 x Connection cable 2-pole MOLEX
2 x Connection cable 8-pole MOLEX
2 x Connection cable 12-pole MOLEX
2 x Power Input connector
2 x Mounting set