Authorized dealer since 1994

Helix IK EC10.1-DVC2 – VW MULTI-TRANS

259,00 €

Available on backorder

The HELIX IK EC10.1-DVC2 – VW MULTI-TRANS is a vehicle-specific enclosure subwoofer for the passenger-side seat console (without swivel seat) of the Volkswagen T6.1, T6 and T5. It houses a 250 mm (10″) IK S10-DVC2 driver rated at 300 W RMS, wireable as 2 x 2, 1 x 4 or 1 x 1 Ω, and ships with a mounting kit.

SKU: ATF-IKEC10.1-DVC2-VWMULTI-TRANS
Category: , ,
Brands:

Helix IK EC10.1-DVC2 – VW MULTI-TRANS – 10″ seat-console subwoofer for VW T6.1, T6 and T5

The IK EC10.1-DVC2 – VW MULTI-TRANS is a HELIX IMPACT enclosure subwoofer made to fit the passenger-side seat console of Volkswagen T6.1, T6 and T5 vans that do not have a swivel seat. It adds deep bass without taking up load or passenger space.

Instead of the 200 mm woofers usually used in this location, it carries a 250 mm (10″) chassis, which according to HELIX gives a noticeable gain in sound pressure and low bass. The up-firing layout projects the bass upwards for an even, immersive result in the cabin.

Key Features

  • Vehicle-specific fit: Designed for the passenger-side seat console of VW T6.1, T6 and T5 without swivel seat.
  • Larger 10″ driver: More sound pressure and deeper bass than conventional 200 mm woofers in the same application.
  • Sandwich paper cone: The 250 mm IK S10-DVC2 chassis uses a sandwich paper cone for full, powerful bass.
  • Up-firing design: Sound radiates upwards for even bass distribution.
  • Optimised enclosure: Construction aimed at good sound quality and bass dispersion inside the vehicle.
  • Selectable impedance: Voice coils can be configured at the terminal as 2 x 2 Ω, 1 x 4 Ω or 1 x 1 Ω to suit different amplifiers and system layouts.
  • Pluggable screw terminal: Quick and safe installation and removal.
  • Flush-mounted chassis: Saves space and better protects the speaker.
  • Durable finish: Carpet surface with an embroidered HELIX logo.
  • Mounting kit included: For secure fixing in the seat console.

Drivers & Construction

One integrated HELIX IK S10-DVC2 chassis (250 mm / 10″) with sandwich paper cone and dual voice coils, flush-mounted and firing upwards in a carpeted enclosure shaped for the seat console.

Acoustic Performance

  • Power handling: 300 W RMS; recommended amplifier power 150–300 W RMS
  • Impedance: 2 x 2 Ω, 1 x 4 Ω or 1 x 1 Ω (selectable at the terminal)
  • Maximum excursion (Xmax): ±6.0 mm
  • Sensitivity: 90 dB @ 2.83 V / 1 m; 87 dB @ 1 W / 1 m

Installation Notes

  • Vehicles: Volkswagen T6.1, T6 and T5 – passenger-side seat console, versions without swivel seat only
  • Dimensions (H x W x D): 193 x 350 x 330 mm (7.6 x 13.5 x 13″)
  • Recommended DSP settings: “Self-define” high-pass at 46 Hz, Q 1.4; EQ filter at 100 Hz, Q 1.5, −3 dB

Technical Specifications

Power handling RMS P 300 Watts
Recommended amplifier power RMS 150 – 300 Watts
Impedance z 2 x 2 Ω / 1 x 4 Ω / 1 x 1 Ω
Max. linear excursion Xmax +/- 6.0 mm
Port tuning frequency Fb –
Sensitivity
SPL

90 dB @ 2.83V / 1m
87 dB @ 1W / 1m

Dimensions (H x W x D)

193 x 350 x 330 mm
7.6 x 13.5 x 13″

Integrated subwoofer chassis HELIX IK S10-DVC2
Recommended DSP settings “Self-define” highpass 46 Hz / Q = 1.4;
EQ filter: 100 Hz / Q = 1.5 / -3 dB

Scope of Delivery

1 x Enclosure subwoofer IK EC10.1-DVC2 – VW MULTI TRANS
1 x Mounting kit
1 x Data sheet

Manufacturer

Helix

Model

IK EC10.1-DVC2 – VW MULTI-TRANS

Guarantee in years

2

Impedance (Ohm)

2 x 2

Nominal power RMS (W)

300

Efficiency (dB)

87 dB

Type

Passive subwoofer box

EAN

4057204335670

Dimensions cm (inch)