Rebec WL10 Passive Subwoofer
The Rebec WL10 is a 25 cm (10″) passive subwoofer from Rebec’s Hi-End Series, developed for car audio systems that require higher power handling, greater low-frequency authority and improved dynamic performance. With 350 W RMS, dual 4 Ohm voice coils and 18 mm Xmax, the WL10 is positioned above the M-Series subwoofers and delivers strong low-frequency support while remaining faithful to Rebec’s philosophy of natural music reproduction.
Key Features
- 350 W RMS Power Handling: 700 W peak capability for demanding, high-output low-frequency systems
- Dual 4 Ohm Voice Coils: Flexible wiring options for mono amplifiers; 75 mm voice coil for high power handling
- 18 mm Xmax: Increased excursion capability for deep, controlled bass down to 18 Hz
- Composite Pulp Cone: Reverse low-pressure molded composite pulp cone with modified butyl rubber surround for stability under high excursion
- Large 180 mm Ferrite Magnet: Stronger motor than the M-Series for higher output and improved driver control
- Sealed or Ported Enclosures: Suitable for both sealed and ported enclosure designs
- Amplifier Matching: Pairs with high-power amplifiers such as the Rebec ES2S (bridged), A1200D, A1800D or D1200
Technical Specifications
- Type: Passive subwoofer
- Size: 25 cm (10″)
- Nominal Power (RMS): 350 W
- Maximum Power (Peak): 700 W
- Sensitivity (2.83 V/1 m): 90 dB
- Frequency Response: 18 Hz – 600 Hz
- Impedance: 4 + 4 Ohm (DCR 3.6 + 3.6 Ohm)
- Voice Coil Diameter: 75 mm (2.95″)
- Cone Material: Reverse low-pressure molded composite pulp
- Surround: Modified butyl rubber
- Magnet: Ferrite, 180 mm
- Resonance Frequency (F0): 25 Hz
- Sd / Vas: 300 cm² / 16 L
- Qms / Qes / Qts: 4.158 / 0.443 / 0.40
- Xmax / Xmech: 18 mm / 19 mm
- Mms / BL: 149 g / 9.19 N/A
Build a dedicated Hi-End low-frequency system around the Rebec WL10 for greater punch, impact and full low-frequency reproduction.
