Match PP 10W-Q – 10″ Quad Voice Coil Plug & Play Subwoofer Driver
The PP 10W-Q is the bare 10″ (250 mm) woofer from the MATCH Plug & Play subwoofer range by Audiotec Fischer. It is intended for cases where none of the ready-made MATCH enclosure subwoofers fits the shape or size of the vehicle, allowing the installer to build a custom enclosure. It is the same driver as in the pre-loaded variants, and the manufacturer guarantees identical acoustic performance as long as the specified net volume and port tuning frequency from the installation instructions are followed.
Designed for compact vented boxes, it combines a stiff hand-scooped paper cone, a double-ventilated voice coil and a powerful magnet, and it is optimised for use with MATCH Plug & Play amplifiers. A connection terminal for the MATCH PP-SC subwoofer cable is included.
Key Features
- 10″ Plug & Play woofer: 250 mm driver for compact vented enclosures.
- Quad voice coil: Impedance 4 x 3 Ohms (DC resistance 4 x 3.0 Ohms).
- Power handling: 300 W RMS / 600 W max.
- Stiff paper cone: Hand-scooped paper for high sound pressure.
- Double-ventilated voice coil: 50.8 mm diameter, 21 mm winding height, reduces compression effects.
- Powerful magnet: Tailored to compact vented enclosures.
- Long excursion: Xmax ±6.5 mm.
- Same driver as MATCH enclosure subs: Same performance when the recommended box is built.
- Connection terminal included: For the MATCH PP-SC subwoofer cable.
- System matched: Optimised for MATCH Plug & Play amplifiers.
Drivers & Construction
- Cone: Hand-scooped paper, cone area (Sd) 333 cm².
- Voice coil: 50.8 mm diameter, 21 mm winding height, quad coil, double ventilated.
- Moving mass (Mms): 98 g.
Acoustic Performance
- Power RMS / max.: 300 W / 600 W.
- Impedance: 4 x 3 Ohms; Re 4 x 3.0 Ohms.
- Sensitivity (1 W / 1 m): 87 dB.
- Fs: 29 Hz; Qms: 3.12; Qes: 0.40; Qts: 0.35.
- Vas: 46 L; Cms: 299 µm/N; BL: 23.5 Tm; Rms: 5.8 kg/s.
- Xmax: ±6.5 mm.
Installation Notes
- Dimensions: Outer diameter 265 mm, installation diameter 232 mm, installation depth 128.5 mm.
- Recommended enclosure: Vented box only – a sealed enclosure is not recommended.
- Vented box: 18 L net volume, port diameter 70 mm (28 cm² port area), port length 33 cm, tuning frequency (Fb) 39 Hz, lower limiting frequency (-3 dB) 36 Hz.
- DSP settings: Highpass Self-Define at 33 Hz with Q 1.3; lowpass Butterworth 24 dB/octave at 80–100 Hz.
- Accessories: MATCH lists the PP-SC cable, PP-M5-SCC 4 adaptor and the M 5DSP, PP 62DSP and PP 86DSP amplifiers.
Technical Specifications
| Power RMS / max. | P | 300 / 600 Watts |
| Impedance | Z | 4 x 3 Ω |
| DC resistance | Re | 4 x 3.0 Ω |
| Frequency response | ||
| Resonance frequency | Fs | 29 Hz |
| Mechanical Q factor | Qms | 3.12 |
| Electrical Q factor | Qes | 0.40 |
| Total Q factor | Qts | 0.35 |
| Compliance | Cms | 299 µm/N |
| Equivalent air volume | Vas | 46 L |
| Force factor | B*I | 23.5 Tm |
| Efficiency 1 W / 1 m | SPL | 87 dB |
| Cone area | Sd | 333 cm² |
| Moving mass | Mms | 98 g |
| Cone material | Hand-scooped paper cone | |
| Mechanical resistance | Rms | 5.8 kg/s |
| Voice coil diameter | ø | 50.8 mm |
| Voice coil winding height | 21 mm | |
| Max. linear excursion | Xmax | +/- 6.5 mm |
| Outer diameter | ø | 265 mm / 10.43″ |
| Installation diameter | ø | 232 mm / 9.13″ |
| Installation depth | 128.5 mm / 5.06″ | |
| Recommended enclosure volumes | ||
| Sealed box | Not recommended | |
| Net volume | – | |
| Lower limiting frequency (-3dB) | – | |
| DSP settings | – | |
| Vented box | ||
| Net volume | 18 L | |
| Port diameter | ø | 70 mm / 2.75″ |
| Port area | 28 cm² | |
| Port length | 33 cm / 13″ | |
| Port tuning frequency | Fb | 39 Hz |
| Lower limiting frequency (-3dB) | 36 Hz | |
| DSP settings | – Highpass: Self-Define; crossover frequency 33 Hz; Q factor 1.3 – Lowpass: Butterworth; 24 dB/octave; crossover frequency 80 – 100 Hz |
Scope of Delivery
1 x Subwoofer MATCH PP 10W-Q
1 x Connection terminal
