JL Audio VX700/5i

The JL Audio VX700/5i is a reference-grade 5-channel system amplifier with integrated digital signal processing (DSP). It combines NexD2 high-speed switching technology with a powerful DSP in a compact chassis, delivering 4 x 100 W plus 300 W to the subwoofer at 2 ohms. All setup and tuning is done through the free TüN software, so there are no knobs or switches on the amplifier.

Key Features

Onboard Tuning Power: Equaliser, delay, crossover, signal routing, mixing and more, optimising each channel’s timing, frequency response and output level.
NexD2 Class-D Design: High-speed switching synchronises power supply and output channels for top-flight fidelity with ultralow noise and distortion.
No Knobs and Switches: All setup and audio adjustments are made in the free TüN software for computers and most handheld devices.
Differential-Balanced Inputs: Accept 200 mV – 16 V RMS over conventional RCA cables while combating induced cable noise.
Eliminate Audible Noises: Accepts speaker-level signals without a line-output converter and rejects alternator whine and other noises.
Configurable Output Channel: Analogue or optical output with routing, EQ, level and DRC control set in TüN.
Advanced Rollback Protection: Monitors thermal condition and adjusts operation to avoid shut-down events and keep the music playing.
JLid Protocol & Presets: Up to 6 storable presets with an optional JLid DRC remote (sold separately); 12 V remote, signal sensing or DC offset turn-on; removable power, signal and speaker connectors.

Technical Specifications

Channels: 5 (4 main + 1 subwoofer)
Amplifier Class: Class D (NexD2)
RMS Power @ 4 Ohm (14.4 V, <1% THD): 4 x 75 W + 1 x 180 W
RMS Power @ 2 Ohm (14.4 V, <1% THD): 4 x 100 W + 1 x 300 W
Frequency Response (+0, -1 dB): 12 Hz – 21 kHz (main channels), 12 Hz – 1 kHz (subwoofer channel)
Signal-to-Noise Ratio (ref. rated power): 99 dB analogue inputs; 101 dB main / 102 dB sub digital inputs
THD+N @ Rated Power: <1% @ 2 Ohm
Input Voltage Range (RCA): 200 mV – 16 V RMS
Operating Voltage: 11 – 14.5 V DC
Fuse Rating: 60 A (AFS, AGU or MaxiFuse)
Min. Power/Ground Wire: 4 AWG copper
Dimensions (W x D x H): 250 x 168 x 54 mm (9.81″ x 6.62″ x 2.12″)
Weight: 2.54 kg (5.6 lbs)

Power a full front stage and subwoofer from one compact chassis and tune every detail in software with the JL Audio VX700/5i.

11V – 14.5V

JL Audio VX700/5i