Vibe BA12D2-V5

The Vibe BA12D2-V5 is the 12″ in the BlackAir subwoofer line – the same long-throw engine as the BA10D2 wrapped around a bigger cone. More cone area means more air moved, so it plays louder and reaches deeper, with a big double-stacked motor and 750W RMS power handling behind it. It is the choice when you have the depth and boot space and want the bass to go lower and hit harder.

Key Features

Long-Throw Design: 15 mm of controlled travel each way with a 40 mm tall voice coil that stays in the magnetic gap
Serious Motor: Double-stacked ferrite motor with two 50 oz magnets developing a 17.8 Tm force factor
Dual 2 Ohm Voice Coil: Wire to 1 Ohm (parallel), 4 Ohm (series) or across two channels to suit any amplifier
Twin Spiders: Two spiders keep the big cone travelling straight through its full stroke for low distortion
Fiberglass Cloth Cone: Stiff and light, holds its shape under 750W and 15 mm of travel; foam surround for compliance
Sealed Box Friendly: Vas of 33.6 L – rewards a properly sized sealed enclosure with deep, controlled bass
Solid Build: Aluminium voice coil former for heat dissipation, steel basket, injection-moulded dust cap

Technical Specifications

Type: Passive subwoofer
Speaker Size: 12″ (306 mm)
RMS Power: 750 W
Peak Power: 2250 W
Impedance: Dual 2 Ohm
Sensitivity: 83 dB
Frequency Response: 20 Hz – 750 Hz
Xmax: 15 mm (0.59″)
Qts: 0.455
Vas: 33.6 L (1.19 cu.ft.)
Mounting Depth: 186 mm (7.3″)
Mounting Diameter: 284 mm (11.1″)
Recommended Enclosure: Sealed, 1.5 – 2.5 cu.ft.
Recommended Amplifier: POWERBOX800.1D-V3
Grille: Not included

Give the BA12D2-V5 the depth, the power and the box it wants, and it delivers bass you feel in your chest.

20 Hz – 750 Hz

Vibe BA12D2-V5