Phoenix Gold ZLOC2.2 2-Channel Line Output Converter
The Phoenix Gold ZLOC2.2 is a sophisticated 2-channel audio converter that bridges the gap between OEM systems and aftermarket audio components. Many modern cars have integrated amplifiers whose performance falls short of what discerning listeners expect, yet replacing the whole system is impractical. The ZLOC2.2 bypasses OEM resistance while eradicating unwanted system noise, converting the high-level speaker signals from your factory head unit or amplifier into a clean low-level output — without compromising your vehicle’s factory settings.
Key Features
- OEM Integration: Two high-level inputs capture speaker signals from the OEM head unit or amplifier and feed a clean low-level RCA output for aftermarket amplifiers.
- Built-in CLIP Indicator: Monitors input and output signals for distortion and alerts you so the output can be adjusted for a pristine, distortion-free signal.
- Selectable Load & Ground Isolation: Load select 10 Ohm / 60 Ohm / 20K Ohm and GND / ISO / 200 Ohm ground isolation for compatibility with factory amplifiers and noise-free operation.
- Bass Control: Adjustable centre frequency 20 Hz – 110 Hz with -9 dB to +9 dB bass level.
- Flexible Turn-On: REM, DC-offset or audio-sense turn-on modes with remote input and remote output for your amplifier.
- High Output Voltage: Up to 7.5V RCA output at 14.4V with >100 dB signal-to-noise ratio and <0.01% THD+N.
- Aluminium Chassis: Compact 130.6 x 82 x 24.8 mm aluminium housing with quick-connect 16 AWG terminals.
Technical Specifications
- Speaker Input / Outputs: 2 channels / 4 channels (RCA)
- REM In / REM Out: Yes / Yes
- Load Select / Ground Isolation: 10 / 60 / 20K Ohm; GND / ISO / 200 Ohm
- Gain / Clipping Indicator: Yes (x1), -28 dB to 0 dB / Yes (x1)
- Bass Control: Centre frequency 20 Hz – 110 Hz, level -9 dB to +9 dB
- Turn On Mode: REM / DC / AUDIO (trigger DC 3 – 7V)
- Input Sensitivity: 0.5V – 32V (max 40V at 20K Ohm load)
- Output Voltage: Max 7.5V @ 14.4V
- Signal to Noise / THD+N: >100 dB @ 6.4V output / <0.01%
- Frequency Response: 10 Hz – 30 kHz
- Operating Voltage / Current Draw: 8V – 32V / 120 – 150 mA
- Dimensions (L x W x H): 130.6 x 82 x 24.8 mm (5.14″ x 3.23″ x 0.98″), aluminium chassis, 16 AWG quick-connect terminals
Add an aftermarket amplifier to your factory system the clean way with the Phoenix Gold ZLOC2.2 line output converter.
